Comnet CWGE2FE8MSPOE Informations techniques télécharger pdf (Page 97)

1 is 10Mbps, users can set it’s effective egress rate is 1Mbps, ingress rate is

500Kbps. The switch performs the ingress rate by packet counter to meet the

specified rate

 Ingress: Enter the port effective ingress rate (The default value is “0”).

 Egress: Enter the port effective egress rate (The default value is “0”).

 And then, click to apply the settings

VLAN configuration

A Virtual LAN (VLAN) is a logical network grouping that limits the broadcast domain, that

would allow you to isolate network traffic, so only the members of the same VLAN will

receive traffic from the ones on the same VLAN. Basically, creating a VLAN on a switch is

the logical equivalent of reconnecting a group of network devices to another Layer 2

switch. However, all the network devices are still physically plugged into the same switch.

This switch supports Port-based and 802.1Q (tagged-based) VLAN. The default

configuration of VLAN operation mode is “Disable”.

VLAN Configuration interface

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 142 143

Pas de commentaire

Comnet CWGE2FE8MSPOE Informations techniques Page 97