Comnet CWFE8MS/DIN Informations techniques télécharger pdf (Page 48)

5.10.3 Power Alarm Configuration

Power alarm function enables the Relay alarm action. Without enabling the power alarm

function, the Relay alarm action will not work even if the Relay alarm is set. Mark the

check box and select button.

Power Alarm interface

5.11 IP Configuration

Configure the IP Settings and DHCP client function, and then select to apply

the new IP settings.

 DHCP Client: Enable or Disable the DHCP client function. When DHCP client

function is enabled, the switch will be assigned an IP address from the network

DHCP server. The DHCP server assigned IP address will replace the default IP

address. After selecting the Apply button, a popup dialog box will appear and inform

the user that when the DHCP client is enabled, the current IP address will be lost

and user can find the new IP address on the DHCP server. To cancel the DHCP

client function, select “cancel”.

 IP Address: Assign the IP address that your network is using. If DHCP client

function is enabled and then the user does not need to assign the IP address. And,

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 74 75

Pas de commentaire

Comnet CWFE8MS/DIN Informations techniques Page 48