Comnet CNGE2FE8MSPOE Informations techniques télécharger pdf (Page 110)

103

Enable Couple Ring string label.

 Couple Port: Assign the member port which is connected to the other ring group.

 Control Port: When the Enable Couple Ring checkbox is ticked, you have to

assign the control port to form a couple-ring group between the two X-rings.

 Enable Dual Homing: Set up one of the ports on the switch to be the Dual Homing

port. For a switch, there is only one Dual Homing port. Dual Homing function works

only when the X-Ring function enabled.

 And then, click to have the configuration take effect.

X-ring Interface

[NOTE]

1. When the X-Ring function enabled, the user must disable the RSTP. The

X-Ring function and RSTP function cannot exist on a switch at the same

time.

2. Remember to execute the “Save Configuration” action, otherwise the new

configuration will lose when switch powers off.

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 161 162

Pas de commentaire

Comnet CNGE2FE8MSPOE Informations techniques Page 110